Shenzhen Flus Technology Co.,Ltd+86-755-89688122, 89688211, 89688255


Home > News > Content
Contact Us

Add: 3rd Floor, Lantian Building, Fountian Science Park, Pingan Road, Pinghu Town, Longgang District, Shenzhen, China. 518111

Tel: 86-755-89688122, 89688211, 89688255

Fax: 86-755-89688133


Application Of Light Meter In Photography

Shenzhen Flus Technology Co.,Ltd | Updated: Sep 20, 2017

     In the spot photo, in order to get a sense of reality, you need the shaded part to become black! How do you light it up for this purpose? To achieve this typical field light effect, use your reflection light meter to take readings of the portions of the strong light or the midtones, rather than the shaded portions. In so doing, you are actually making the image less exposed. You don't get enough light in the shadow part of the film to produce details there. Results: In the film, the shadow part is not detailed, in the photo, whether it is in color or black and white photographs, the shadow part of the black.Light Meter

     This is the use of negative, whether it is color negative or black and white negative, you photometric to pursue the typical field light effect. Remember to light the part of the glare or the midtones. What if you use an incident light meter instead of a reflective light meter? It's not hard. The incident light meter gives a normal reading, and using this readout produces a "normal" image.Light Meter

     However, in order to obtain the effect of the field light, you do not need the normal image, what you need is the image with insufficient exposure. Therefore, when you take the incident light readings, use the boundary exposure, which is to take the aperture of a small block or two block, so as to make the image of insufficient exposure.Light Meter

     If you use a gray card, the truth is the same. First, according to the normal method of reading, and then use the surrounding light, that is, the aperture to receive a small block or two-block exposure, so that the image exposure is insufficient. However, the use of color film, slides should be cautious, can not be too much of the aperture. The danger of making the color film less exposed is that you may get a nasty slant. Light Meter

     No one likes the picture of Green face! If you use color film, our suggestion is to follow the film exposure rules to expose the strong light part. Then, in order to get a light effect on the scene of the slide, only the aperture is small one block.Light Meter