Shenzhen Flus Technology Co.,Ltd+86-755-89688122, 89688211, 89688255


Home > News > Content
Contact Us

Add: 3rd Floor, Lantian Building, Fountian Science Park, Pingan Road, Pinghu Town, Longgang District, Shenzhen, China. 518111

Tel: 86-755-89688122, 89688211, 89688255

Fax: 86-755-89688133


How To Use The Light Meter Correctly

Shenzhen Flus Technology Co.,Ltd | Updated: Aug 23, 2017

             How do you light it up for this purpose? To achieve this typical field light effect, use your reflection light meter to take readings of the portions of the strong light or the midtones, rather than the shaded portions. In so doing, you are actually making the image less exposed. You don't get enough light in the shadow part of the film to produce details there. Results: In the film, the shadow part of the details, in the photo, whether it is color or black and white photographs, the shadow part of the black.Light Meter

             Therefore, this is the use of negative, whether it is a color negative or black and white negative, you light to the pursuit of a typical field lighting effect reasons. Remember to light the part of the glare or the midtones. What if you use a light meter instead of a reflective light meter? It's not hard. The injection light meter gives a normal reading, and using this readout produces a "normal" image. But you don't need a normal image in order to get the light on the spot--what you need is an overexposed image. Therefore, when you take the incoming light readings, use the boundary exposure, that is, the aperture is small one block or two block, so as to make the image of insufficient exposure.

             If you use a gray card, the truth is the same. First, according to the normal method of reading, and then use the surrounding light, that is, the aperture to receive a small block or two-block exposure, so that the image exposure is insufficient. However, the use of color film---slides should be cautious, not too much of the aperture. The danger of making the color film less exposed is that you may get a nasty slant. No one likes the picture of Green face! If you use color film, our advice is to follow the rules of the color film exposure--to the glare part. Then, in order to get a light effect on the scene of the slide, only the aperture is small one block.Light Meter

            Finally, if the scene is very dark, whether you use negative film, you can use the skills used by professional photographers. The scene may be too dark to use a reflective light meter to measure the readings of the midtones or the strong light portions. The scene may be too dim to measure the reading of the gray card. The scene may be too dim to be used to measure the readings using the injection light meter. So what do you do?Light Meter