Shenzhen Flus Technology Co.,Ltd+86-755-89688122, 89688211, 89688255


Home > News > Content
Contact Us

Add: 3rd Floor, Lantian Building, Fountian Science Park, Pingan Road, Pinghu Town, Longgang District, Shenzhen, China. 518111

Tel: 86-755-89688122, 89688211, 89688255

Fax: 86-755-89688133


Introduction Of Physical Properties Of Infrared Thermometer

Shenzhen Flus Technology Co.,Ltd | Updated: Sep 20, 2017

     Infrared thermometer is composed of optical system, photoelectric detector, signal amplifier and signal processing. The optical system converges to the target infrared radiation energy in the field, and the infrared energy is focused on the photoelectric detector and converts to the corresponding electrical signal, which is converted to the temperature value of the measured target. The benefits of using infrared thermometer, convenient! Infrared Thermometer

    Infrared thermometer can provide a rapid temperature measurement, in the use of thermocouple to read a leakage connection point of time, with infrared thermometer can read almost all the connection point temperature. In addition because the infrared thermometer is solid. Lightweight. (All lighter than 10 ounces), and is easy to put in a holster. So you can carry it when you are in the factory and in your daily inspection work.Infrared Thermometer

     Another advanced point of the infrared thermometer is accuracy, which is usually within 1 degrees. This performance is particularly important when you are doing preventative maintenance, such as monitoring of harsh production conditions and special events that will cause damage or downtime to the device.Infrared Thermometer

    Because most equipment and factories operate for 365 days, downtime is equivalent to reducing incoming, to prevent such losses by scanning all on-site electronic devices-circuit breakers-Transformers-fuses-switches-bus and switchboard to find hot. With an infrared thermometer, you can even quickly detect small changes in the temperature of the manipulation, which can be resolved at the beginning of its infancy, reducing the cost of equipment failures and the scope of maintenance.Infrared Thermometer

    Safety is the most important benefit of using infrared thermometer. Unlike the contact thermometer, the infrared thermometer can safely read inaccessible or unreachable target temperatures, and you can read the target temperature within the range agreed by the instrument. Infrared Thermometer

    Non-contact temperature measurements can also be conducted in unsafe or contact areas where the temperature is more difficult, such as steam valves or heating furnaces, and they do not need to be exposed to the risk of burning fingers when they are in contact with temperature. An accurate measurement of the supply/outlet temperature above 25 feet above the head is as easy as measuring at hand. The Raytek infrared thermometer has laser aiming, which is easy to identify the target area. With it your work becomes much easier.Infrared Thermometer