Shenzhen Flus Technology Co.,Ltd+86-755-89688122, 89688211, 89688255


Home > News > Content
Contact Us

Add: 3rd Floor, Lantian Building, Fountian Science Park, Pingan Road, Pinghu Town, Longgang District, Shenzhen, China. 518111

Tel: 86-755-89688122, 89688211, 89688255

Fax: 86-755-89688133


Why Do The Measuring Instruments Use 4-20mA Current?

Shenzhen Flus Technology Co.,Ltd | Updated: Jun 08, 2018

1, the voltage signal is unstable, easy to be interfered in the long-distance transmission, the current signal is relatively stable. The current signal is used in the transmission process, and the voltage signal (range of voltage values) is used in the specific control of the control instrument and the DCS system.

2, the range of 0 ~ 20mA signal and fault signal can not be distinguished. Less than 4mA indicates line failure, or suspicion of zero drift. The birth of a two-wire instrument prompted the change of standards, and the new standard of current signal is 4~20mA.

The 3,4-20mA standard is set for 2-wire sensors, where the 0-4mA current is needed to supply the sensor's own minimum operating current. If 0-20mA is used, the sensor will not be able to obtain sufficient signal when the signal is small. Working energy.

4. In fact, for 4~20MA signals, the DCS system generally counts more than 20.2mA and less than 3.8mA as faults.

Previous: No Information

Next: Pressure And Airflow Of Anemometer